unisonic technologies co., ltd uk2996 mosfet www.unisonic.com.tw 1 of 6 copyright ? 2011 unisonic technologies co., ltd qw-r502-063.c 600v silicon n-channel power mosfet ? description the uk2996 is an n-channel enhancement mode field-effect power transistor. intended for use in hi gh voltage, high speed switching applications in power supplies, dc-dc converter, relay drive and pwm motor drive controls. ? features * fast switching times * improved inductive ruggedness * high forward transfer admittance * low on resistance * low leakage current * lower input capacitance ? symbol to-220 1 to-220f to-220f1 1 to-220f2 1 1 ? ordering information ordering number package pin assignment packing lead free halogen free 1 2 3 uk2996l-ta3-t uk2996g-ta3-t to-220 g d s tube UK2996L-TF1-T uk2996g-tf1-t to-220f1 g d s tube uk2996l-tf2-t uk2996g-tf2-t to-220f2 g d s tube uk2996l-tf3-t uk2996g-tf3-t to-220f g d s tube note: pin assignment: g: gate d: drain s: source
uk2996 mosfet unisonic technologies co., ltd 2 of 6 www.unisonic.com.tw qw-r502-063.c ? absolute maximum rating parameter symbol ratings unit drain to source voltage v dss 600 v continuous drain current i d 10 a pulsed drain current i dm 30 a drain to gate voltage (r gs = 20 k ? ) v dgr 600 v gate to source voltage v gss 30 v avalanche current i ar 10 a single pulsed avalanche energy (note 2) e as 252 mj repetitive avalanche energy (note 3) e ar 4.5 mj power dissipation (t c = 25 c) to-220 p d 45 w to-220f/to-220f1 36 to-220f2 38 junction temperature t j +150 c storage temperature t stg -55 ~ +150 c note 1. absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. l = 4.41 mh, i ar = 10 a, v dd = 90 v, r g = 25 ? , starting t j = 25c. 3. pulse width and frequency is limited by t j . ? thermal data characteristics symbol ratings unit channel to ambient ja 62.5 c / w channel to case to-220 jc 2.78 c / w to-220f/to-220f1 3.47 to-220f2 3.29 ? electrical characteristics (t a = 25c) parameter symbol test conditions min typ max unit gate ? source breakdown voltage bv gss v ds = 0v, i g = 10a 30 v drain ? source breakdown voltage bv dss v gs = 0v, i d = 10ma 600 v gate threshold voltage v gs ( th ) v ds = 10v, i d = 1ma 2.0 4.0 v gate source leakage current i gss v gs = 25v, v ds = 0v 10 a drain source leakage current i dss v ds = 600v, v gs = 0v 100 a static drain ? source on resistance r ds ( on ) v gs = 10v, i d = 5a 0.74 1. 0 ? forward transconductance g fs v ds = 10v, i d = 5a 3.4 6.8 s input capacitance c iss v ds = 20v, v gs = 0v, f = 1mhz 1500 pf reverse transfer capacitance c rss 13 output capacitance c oss 140 total gate charge q g i d = 10a, v dd 400v, v gs = 10v 38 nc gate ? source charge q gs 21 gate ? drain charge q gd 17 switching time turn-on delay time t on 55 ns turn-on rise time t r 15 turn ? off delay time t off 145 turn-off fall time t f 27
uk2996 mosfet unisonic technologies co., ltd 3 of 6 www.unisonic.com.tw qw-r502-063.c ? source ? drain diode characteristics (t a = 25c) parameter symbol test conditions min typ max unit diode forward voltage v sd v gs = 0v, i s = 10a -1.7 v continuous source current (body diode) i s integral reverse p-n junction diode in the mosfet gate source drain 10 a pulse source current (body diode) i sm 30 a reverse recovery time t rr v gs = 0v, i s = 10a, di f /dt = 100 a/s 1600 ns reverse recovery charge q rr 17 c
uk2996 mosfet unisonic technologies co., ltd 4 of 6 www.unisonic.com.tw qw-r502-063.c ? test circuit and wave form time v dd i ar b vdss v dd i d (t) t p v ds (t) dut r g t p -15v +15v i d l l v ds
uk2996 mosfet unisonic technologies co., ltd 5 of 6 www.unisonic.com.tw qw-r502-063.c ? typical characteristics
uk2996 mosfet unisonic technologies co., ltd 6 of 6 www.unisonic.com.tw qw-r502-063.c utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
